YourSQLDba版本升级总结

在使用YourSQLDba做数据库备份、维护时，像其它软件一样，版本升级是不可避免的。因为YourSQLDba一直在不停更新版本、扩展功能。下面介绍一下升级YourSQLDba时的具体步骤和一些注意事项。下面案例，YourSQLDba原版本为YourSQLDba version: 5.0.2 2012-06-12，升级到YourSQLDba 6.2.5.1。

步骤1： 首先查看服务器对应YourSQLDba的版本信息。因为不同版本的升级可能有所区别。要做的工作可能不一样。

Exec YourSQLDba.Install.PrintVersionInfo

========================================

YourSQLDba version: 5.0.2 2012-06-12

========================================

步骤2：查看YourSQLDba下的所有作业信息。

这个步骤，主要是因为我们在不同程度的扩展了YourSQLDba的一些功能。另外，有可能你对YourSQLDba_FullBackups_And_Maintenance等作业做了一些修改、变更。所以在升级前对变跟的地方有所了解，记录整理，方便升级后做出对应的修改。如果你没有对YourSQLDba做任何修改、扩展，那么可以忽略这个步骤。

使用下面SQL将所有YourSQLDba的作业列出来，然后收集、整理是否有做变跟。是否需要在升级后，做出对应的调整、修改。

SELECT j.job_id                                       AS JOB_ID

      ,j.name                                         AS JOB_NAME

      ,CASE WHEN [enabled] =1 THEN 'Enabled'

                              ELSE 'Disabled' END     AS JOB_ENABLED

      ,j.category_id                                  AS JOB_CATEGORY_ID

      ,c.name                                         AS JOB_CATEGORY_NAME

      ,[description]                                  AS JOB_DESCRIPTION

      ,date_created                                   AS DATE_CREATED

      ,date_modified                                  AS DATE_MODIFIED

FROM msdb.dbo.sysjobs j

INNER JOIN msdb.dbo.syscategories c ON j.category_id = c.category_id

WHERE   job_id IN( SELECT job_id

                  FROM    msdb.dbo.sysjobsteps

                  WHERE   database_name = 'YourSQLDba' )

 ORDER BY j.name

步骤3：执行YourSQLDba脚本，如果你没有做任何扩展。那么直接执行脚本即可，不需要修改任何脚本。

如果你研究过了脚本，那么你们会发现，YourSQLDba是会保留原来的数据的，在代码里面，你会看到在删除YourSQLDba数据库之前，脚本会将先前YourSQLDba的数据保存到临时表。

If databasepropertyEx('YourSQLDba','status') IS NOT NULL -- db is there

Begin

  -- save data about some YourSqlDba tables

  If object_id('tempdb..##JobHistory') is not null Drop table ##JobHistory;

  If object_id('tempdb..##JobLastBkpLocations') is not null Drop table ##JobLastBkpLocations;

  If object_id('tempdb..##JobSeqCheckDb') is not null Drop table ##JobSeqCheckDb;

  If object_id('tempdb..##TargetServer') is not null Drop table ##TargetServer;

  If object_id('tempdb..##JobSeqUpdStat') is not null Drop table ##JobSeqUpdStat;

  If object_id('tempdb..##NetworkDrivesToSetOnStartup') is not null Drop table ##NetworkDrivesToSetOnStartup;

  -- If table exists in previous version save its content

  If Object_id('YourSqlDba.Maint.JobHistory') IS NOT NULL

    Select * Into ##JobHistory From YourSqlDba.Maint.JobHistory

  If Object_id('YourSqlDba.Maint.JobLastBkpLocations') IS NOT NULL

    Select * Into ##JobLastBkpLocations From YourSqlDba.Maint.JobLastBkpLocations

  If Object_id('YourSqlDba.Mirroring.TargetServer') IS NOT NULL

    Select * Into ##TargetServer From YourSqlDba.Mirroring.TargetServer

  If Object_id('YourSqlDba.Maint.JobSeqUpdStat') IS NOT NULL

    Select * Into ##JobSeqUpdStat From YourSqlDba.Maint.JobSeqUpdStat

  If Object_id('YourSqlDba.Maint.JobSeqCheckDb') IS NOT NULL

    Select * Into ##JobSeqCheckDb From YourSqlDba.Maint.JobSeqCheckDb

  If Object_id('YourSqlDba.Maint.NetworkDrivesToSetOnStartup') Is NOT NULL

    Select * Into ##NetworkDrivesToSetOnStartup From YourSqlDba.Maint.NetworkDrivesToSetOnStartup

然后在YourSQLDba创建成功后，将数据导入到新建的表后，删除临时表。部分脚本如下所示：

-- if the table doesn't exists create the latest version

If object_id('Maint.JobSeqCheckDb') is null

Begin

  Declare @sql nvarchar(max)

  Set @sql =

  Create table  Maint.JobSeqCheckDb

    seq         int

  Insert into Maint.JobSeqCheckDb values(0)

  Exec (@sql)

  If Object_Id('tempdb..##JobSeqCheckDb') IS NOT NULL

    Exec

    Insert Into Maint.JobSeqCheckDb (seq)

    Select Seq

    From ##JobSeqCheckDb

    Drop table ##JobSeqCheckDb

End

GO

如果你做过扩展，例如我按天、周、月监控数据库的增长情况，那么我要在YourSQLDba升级过程中保留这些历史数据，那么就必须修改这部分脚本（这些涉及太多脚本，不宜在此贴过多脚本，在此不做过多探讨）。YourSQLDba脚本升级成功后，会有下面提示信息

步骤4：更新YourSQLDba_FullBackups_And_Maintenance和YourSQLDba_LogBackups作业。

首先，在YourSQLDba升级过程中，脚本并不会更新这两个作业。在前面的几个版本中，都不需要重新新作业YourSQLDba_FullBackups_And_Maintenance等，因为即使版本不一样，但是作业功能基本是一致的。但是像这样两个版本差别大的时候，作业里面执行的存储过程的参数都不一样了。例如5.0.2，里面全备的执行的存储过程为

exec Maint.YourSqlDba_DoMaint

  @oper = 'YourSQLDba_Operator'

, @MaintJobName = 'YourSQLDba: DoInteg,DoUpdateStats,DoReorg,Full backups'

, @DoInteg = 1

, @DoUpdStats = 1

, @DoReorg = 1

, @DoBackup = 'F'

, @FullBackupPath = 'M:\DB_BACKUP\FULL_BACKUP\'

, @LogBackupPath = 'M:\DB_BACKUP\LOG_BACKUP\'

-- Flush database backups older than the number of days

, @FullBkpRetDays = 1

-- Flush log backups older than the number of days

, @LogBkpRetDays = 2

-- Spread Update Stats over 7 days

, @SpreadUpdStatRun =1

-- Maximum number of consecutive days of failed full backups allowed

-- for a database before putting that database (Offline).

, @ConsecutiveDaysOfFailedBackupsToPutDbOffline = 9999

-- Each database inclusion filter must be on its own line between the following quote pair

, @IncDb =

-- Each database exclusion filter must be on its own line between the following quote pair

, @ExcDb =

-- Each database exclusion filter must be on its own line between the following quote pair

, @ExcDbFromPolicy_CheckFullRecoveryModel =

但是6.2.5.1里面，执行的存储过程如下所示，多了参数 @SpreadCheckDb，参数@ConsecutiveDaysOfFailedBackupsToPutDbOffline名字变了，如果不做修改，那么作业就会报错。

exec Maint.YourSqlDba_DoMaint

  @oper = 'YourSQLDba_Operator'

, @MaintJobName = 'YourSQLDba: DoInteg,DoUpdateStats,DoReorg,Full backups'

, @DoInteg = 1

, @DoUpdStats = 1

, @DoReorg = 1

, @DoBackup = 'F'

, @FullBackupPath = 'M:\DB_BACKUP\FULL_BACKUP\'

, @LogBackupPath = 'M:\DB_BACKUP\LOG_BACKUP\'

-- Flush database backups older than the number of days

, @FullBkpRetDays = 1

-- Flush log backups older than the number of days

, @LogBkpRetDays =2

-- Spread Update Stats over 7 days

, @SpreadUpdStatRun = 1

-- Spread Check DB without 'PHYSICAL_ONLY' over 7 days

, @SpreadCheckDb = 7

-- Maximum number of consecutive days of failed full backups allowed

-- for a database before putting that database (Offline).

, @ConsecutiveDaysOfFailedBackupsToPutDbOffline = 0

-- Each database inclusion filter must be on its own line between the following quote pair

, @IncDb =

-- Each database exclusion filter must be on its own line between the following quote pair

, @ExcDb =

-- Each database exclusion filter must be on its own line between the following quote pair

, @ExcDbFromPolicy_CheckFullRecoveryModel =

而升级脚本并不会重建或更新作业，所以我们执行初始化脚本YourSQLDba.[Install].[InitialSetupOfYourSqlDba]更新作业。注意，执行该脚本后，你原来的配置参数都会使用初始化参数，例如（@FullBkpRetDays，@LogBkpRetDays…..等）,另外，像YourSQLDba_LogBackups作业的Schedule变为15分钟做一次事务日志备份，在执行脚本前，最好记录原来的参数，以免影响原来的备份策略。

EXEC YourSQLDba.[Install].[InitialSetupOfYourSqlDba]

  @FullBackupPath = 'M:\DB_BACKUP\FULL_BACKUP\' -- full backup path destination

 ,@LogBackupPath = 'M:\DB_BACKUP\LOG_BACKUP\'   -- log backup path destination

 ,@email = 'xxx@xxxx.com'                  -- Email recipients (or distribution list)

 ,@SmtpMailServer = 'xxx.xxx.xxx.xxx'             -- Mail server that accept SMTP mail

 ,@ConsecutiveDaysOfFailedBackupsToPutDbOffline = 9999

另外，如果我们扩展了YourSQLdba的脚本，此时就必须添加相应存储过程,作业倒不必新建(因为YourSQLDba升级不会删除作业,但是由于YourSQLDba数据库重建了,所以作业里面调用的存储过程可能没有了)。

巴特西

YourSQLDba版本升级总结

最新文章

热门文章