【Spring】详解Spring中Bean的加载
2024-04-11 05:07:52
之前写过bean的解析，这篇来讲讲bean的加载，加载要比bean的解析复杂些，该文之前在小编原文中有发表过，要看原文的可以直接点击原文查看，从之前的例子开始，Spring中加载一个bean的方式：
TestBean bean = factory.getBean("testBean");
来看看getBean(String name)方法源码，
@Override
public Object getBean(String name) throws BeansException {
return doGetBean(name, null, null, false);
}
该getBean(String name)方法位于AbstractBeanFactory抽象类中，AbstractBeanFactory与XmlBeanFactory类关系可以看下图：
接下去跟进doGetBean()方法源码：
protected <T> T doGetBean(
final String name, final Class<T> requiredType, final Object[] args, boolean typeCheckOnly)
throws BeansException {
// 提取beanName
final String beanName = transformedBeanName(name);
Object bean; // 试着从缓存或实例工厂中获取
Object sharedInstance = getSingleton(beanName);
if (sharedInstance != null && args == null) {
if (logger.isDebugEnabled()) {
if (isSingletonCurrentlyInCreation(beanName)) {
logger.debug("Returning eagerly cached instance of singleton bean '" + beanName +
"' that is not fully initialized yet - a consequence of a circular reference");
}
else {
logger.debug("Returning cached instance of singleton bean '" + beanName + "'");
}
}
// 返回实例，有时存在如BeanFactory这样情况时并不是直接返回实例本身而是返回指定方法返回的实例
bean = getObjectForBeanInstance(sharedInstance, name, beanName, null);
} else {
// Fail if we're already creating this bean instance:
// We're assumably within a circular reference.
if (isPrototypeCurrentlyInCreation(beanName)) {
throw new BeanCurrentlyInCreationException(beanName);
} // Check if bean definition exists in this factory.
BeanFactory parentBeanFactory = getParentBeanFactory();
// 如果在所有已经加载的类中没有beanName则会尝试从parentBeanFactory中检测
if (parentBeanFactory != null && !containsBeanDefinition(beanName)) {
// Not found -> check parent.
String nameToLookup = originalBeanName(name);
// 到BeanFactory查找
if (args != null) {
// Delegation to parent with explicit args.
return (T) parentBeanFactory.getBean(nameToLookup, args);
}
else {
// No args -> delegate to standard getBean method.
return parentBeanFactory.getBean(nameToLookup, requiredType);
}
}
// 如果不是只做类型检查则是创建bean
if (!typeCheckOnly) {
markBeanAsCreated(beanName);
} try {
// 将存储XML配置文件的GernericBeanDefinition转换成RootBeanDefinition，如果BeanName是子Bean的话会合并父类的相关属性
final RootBeanDefinition mbd = getMergedLocalBeanDefinition(beanName);
checkMergedBeanDefinition(mbd, beanName, args); // Guarantee initialization of beans that the current bean depends on.
String[] dependsOn = mbd.getDependsOn();
// 如果存在依赖的话要递归实例化依赖的bean
if (dependsOn != null) {
for (String dependsOnBean : dependsOn) {
if (isDependent(beanName, dependsOnBean)) {
throw new BeanCreationException(mbd.getResourceDescription(), beanName,
"Circular depends-on relationship between '" + beanName + "' and '" + dependsOnBean + "'");
}
registerDependentBean(dependsOnBean, beanName);
getBean(dependsOnBean);
}
} // Create bean instance.
// 依赖的bean实例化完后就可以实例化mbd了
if (mbd.isSingleton()) {
sharedInstance = getSingleton(beanName, new ObjectFactory<Object>() {
@Override
public Object getObject() throws BeansException {
try {
return createBean(beanName, mbd, args);
}
catch (BeansException ex) {
// Explicitly remove instance from singleton cache: It might have been put there
// eagerly by the creation process, to allow for circular reference resolution.
// Also remove any beans that received a temporary reference to the bean.
destroySingleton(beanName);
throw ex;
}
}
});
bean = getObjectForBeanInstance(sharedInstance, name, beanName, mbd);
} else if (mbd.isPrototype()) {
// It's a prototype -> create a new instance.
Object prototypeInstance = null;
try {
beforePrototypeCreation(beanName);
prototypeInstance = createBean(beanName, mbd, args);
}
finally {
afterPrototypeCreation(beanName);
}
bean = getObjectForBeanInstance(prototypeInstance, name, beanName, mbd);
} else {
// 在对应的scope上实例化bean
String scopeName = mbd.getScope();
final Scope scope = this.scopes.get(scopeName);
if (scope == null) {
throw new IllegalStateException("No Scope registered for scope '" + scopeName + "'");
}
try {
Object scopedInstance = scope.get(beanName, new ObjectFactory<Object>() {
@Override
public Object getObject() throws BeansException {
beforePrototypeCreation(beanName);
try {
return createBean(beanName, mbd, args);
}
finally {
afterPrototypeCreation(beanName);
}
}
});
bean = getObjectForBeanInstance(scopedInstance, name, beanName, mbd);
}
catch (IllegalStateException ex) {
throw new BeanCreationException(beanName,
"Scope '" + scopeName + "' is not active for the current thread; " +
"consider defining a scoped proxy for this bean if you intend to refer to it from a singleton",
ex);
}
}
}
catch (BeansException ex) {
cleanupAfterBeanCreationFailure(beanName);
throw ex;
}
} // 检查需要的类型是否符合实例bean的实际类型
if (requiredType != null && bean != null && !requiredType.isAssignableFrom(bean.getClass())) {
try {
return getTypeConverter().convertIfNecessary(bean, requiredType);
}
catch (TypeMismatchException ex) {
if (logger.isDebugEnabled()) {
logger.debug("Failed to convert bean '" + name + "' to required type [" +
ClassUtils.getQualifiedName(requiredType) + "]", ex);
}
throw new BeanNotOfRequiredTypeException(name, requiredType, bean.getClass());
}
}
return (T) bean;
}
整个bean加载的过程步骤相对繁琐，主要步骤有以下几点：
转换beanName
要知道平时开发中传入的参数name可能只是别名，也可能是FactoryBean，所以需要进行解析转换，一般会进行以下解析：
（1）消除修饰符，比如name="&test"，会去除&使name="test"；
（2）取alias表示的最后的beanName，比如别名test01指向名称为test02的bean则返回test02。从缓存中加载实例
实例在Spring的同一个容器中只会被创建一次，后面再想获取该bean时，就会尝试从缓存中获取；如果获取不到的话再从singletonFactories中加载。实例化bean
缓存中记录的bean一般只是最原始的bean状态，这时就需要对bean进行实例化。如果得到的是bean的原始状态，但又要对bean进行处理，这时真正需要的是工厂bean中定义的factory-method方法中返回的bean，上面源码中的getObjectForBeanInstance就是来完成这个工作的。检测parentBeanFacotory
从源码可以看出如果缓存中没有数据会转到父类工厂去加载，源码中的!containsBeanDefinition(beanName)就是检测如果当前加载的xml配置文件中不包含beanName所对应的配置，就只能到parentBeanFacotory去尝试加载bean。存储XML配置文件的GernericBeanDefinition转换成RootBeanDefinition之前的文章介绍过XML配置文件中读取到的bean信息是存储在GernericBeanDefinition中的，但Bean的后续处理是针对于RootBeanDefinition的，所以需要转换后才能进行后续操作。
初始化依赖的bean
这里应该比较好理解，就是bean中可能依赖了其他bean属性，在初始化bean之前会先初始化这个bean所依赖的bean属性。创建bean
Spring容器根据不同scope创建bean实例。
整个流程就是如此，下面会讲解一些重要步骤的源码。
上面有提到，单例在Spring中的同一容器中只会被创建一次，后面再获取bean的话会直接从缓存中获取，这里是尝试加载，先从缓存中加载，再次就是从singletonFactories中加载；因为在bean中可能会在依赖注入，要避免循环依赖，Spring创建bean时会不等bean创建完成就会将创建该bean的ObjectFactory提前曝光加入到缓存中，但下一个bean创建时要依赖上个bean的话，就直接使用ObjectFacotry。
@Override
public Object getSingleton(String beanName) {
return getSingleton(beanName, true); // true表示允许早期依赖
} protected Object getSingleton(String beanName, boolean allowEarlyReference) {
// 尝试从缓存获取实例
Object singletonObject = this.singletonObjects.get(beanName);
if (singletonObject == null && isSingletonCurrentlyInCreation(beanName)) {
synchronized (this.singletonObjects) {
// 若该bean正在加载则不处理
singletonObject = this.earlySingletonObjects.get(beanName);
if (singletonObject == null && allowEarlyReference) {
ObjectFactory<?> singletonFactory = this.singletonFactories.get(beanName);
if (singletonFactory != null) {
singletonObject = singletonFactory.getObject();
// 存入到缓存中
this.earlySingletonObjects.put(beanName, singletonObject);
this.singletonFactories.remove(beanName);
}
}
}
}
return (singletonObject != NULL_OBJECT ? singletonObject : null);
}
/* 这两个方法在DefaultSingletonBeanRegistry类中 */
源码可以看出这个方法先尝试从singletonObjects中获取实例，如果获取不到值就从earlySingletonObject中去获取，如果再获取不到的话则到singletonFactories里获取beanName对应的ObjectFactory，再调用这个ObjectFactory的getObject来创建bean，并放到earlySingletonObject中，并且从singletonFactories里remove掉这个ObjectFactory。这里有几个存储bean的不同map：
-singletonObjects：保存BeanName和创建bean实例之间的关系。
-singletonFactories：保存BeanName和创建bean实例的工厂之间的关系。
-earlySingletonObject：保存BeanName和创建bean实例之间的关系，与-singletonObjects不同的是当一个单例bean被放到里面后，那当bean在创建过程中，就可以通过getBean方法获取到，可以用来检测循环引用。
-registeredSingletons：保存当前所有已注册的bean。
如果上面缓存中不存在已经加载的单例bean就要重新开始bean的加载过程了，Spring中使用getSingleton重载方法实现bean的加载过程。
public Object getSingleton(String beanName, ObjectFactory<?> singletonFactory) {
Assert.notNull(beanName, "'beanName' must not be null");
synchronized (this.singletonObjects) {
// 先检查bean是否已经加载
Object singletonObject = this.singletonObjects.get(beanName);
// 如果空才进行singleton的bean的初始化
if (singletonObject == null) {
if (this.singletonsCurrentlyInDestruction) {
throw new BeanCreationNotAllowedException(beanName,
"Singleton bean creation not allowed while the singletons of this factory are in destruction " +
"(Do not request a bean from a BeanFactory in a destroy method implementation!)");
}
if (logger.isDebugEnabled()) {
logger.debug("Creating shared instance of singleton bean '" + beanName + "'");
}
beforeSingletonCreation(beanName);
boolean newSingleton = false;
boolean recordSuppressedExceptions = (this.suppressedExceptions == null);
if (recordSuppressedExceptions) {
this.suppressedExceptions = new LinkedHashSet<Exception>();
}
try {
// 初始化bean
singletonObject = singletonFactory.getObject();
newSingleton = true;
}
catch (IllegalStateException ex) {
// Has the singleton object implicitly appeared in the meantime ->
// if yes, proceed with it since the exception indicates that state.
singletonObject = this.singletonObjects.get(beanName);
if (singletonObject == null) {
throw ex;
}
}
catch (BeanCreationException ex) {
if (recordSuppressedExceptions) {
for (Exception suppressedException : this.suppressedExceptions) {
ex.addRelatedCause(suppressedException);
}
}
throw ex;
}
finally {
if (recordSuppressedExceptions) {
this.suppressedExceptions = null;
}
afterSingletonCreation(beanName);
}
if (newSingleton) {
// 存入缓存
addSingleton(beanName, singletonObject);
}
}
return (singletonObject != NULL_OBJECT ? singletonObject : null);
}
}
这段代码使用了回调方法，使程序可以在单例创建的前后做一些准备及处理操作，真正的获取单例bean的方法其实并不是在这个方法实现的，而是在ObjectFactory类型的实例singletonFactory中实现的。
下面准备创建bean
看看createBean()方法源码（该方法在AbstractAutowireCapableBeanFactory类中）：
protected Object createBean(final String beanName, final RootBeanDefinition mbd, final Object[] args)
throws BeanCreationException { if (logger.isDebugEnabled()) {
logger.debug("Creating instance of bean '" + beanName + "'");
}
// 锁定class，根据设置的class属性或根据className来解析Class
resolveBeanClass(mbd, beanName); // 验证和准备覆盖的方法
try {
mbd.prepareMethodOverrides();
}
catch (BeanDefinitionValidationException ex) {
throw new BeanDefinitionStoreException(mbd.getResourceDescription(),
beanName, "Validation of method overrides failed", ex);
} try {
// 用BeanPostProcessors返回代理来替代真正的实例
Object bean = resolveBeforeInstantiation(beanName, mbd);
if (bean != null) {
return bean;
}
}
catch (Throwable ex) {
throw new BeanCreationException(mbd.getResourceDescription(), beanName,
"BeanPostProcessor before instantiation of bean failed", ex);
} Object beanInstance = doCreateBean(beanName, mbd, args);
if (logger.isDebugEnabled()) {
logger.debug("Finished creating instance of bean '" + beanName + "'");
}
return beanInstance;
}
从createBean()方法源码可以看出主要做了以下操作：
1. 根据设置的class属性或根据className来解析Class；
2. 对覆盖进行标记并验证，在Spring配置中是存在lookup-mothod和replace-method的，这两个配置的加载其实就是将配置统一存放在BeanDefinition中的methodOverrides属性里，这个方法的操作也就是针对于这两个配置的；
3. 应用初始化前的后处理器，最后创建bean。
在createBean()方法里执行完resolveBeforeInstantiation方法后，如果创建了代理且不为空的话就直接返回，否则需要进行常规bean的创建，这个创建过程是在doCreateBean中完成的，跟进源码：
protected Object doCreateBean(final String beanName, final RootBeanDefinition mbd, final Object[] args) {
// Instantiate the bean.
BeanWrapper instanceWrapper = null;
if (mbd.isSingleton()) {
instanceWrapper = this.factoryBeanInstanceCache.remove(beanName);
}
if (instanceWrapper == null) {
// 根据指定bean使用相应策略创建实例
instanceWrapper = createBeanInstance(beanName, mbd, args);
}
final Object bean = (instanceWrapper != null ? instanceWrapper.getWrappedInstance() : null);
Class<?> beanType = (instanceWrapper != null ? instanceWrapper.getWrappedClass() : null);
// Allow post-processors to modify the merged bean definition.
synchronized (mbd.postProcessingLock) {
if (!mbd.postProcessed) {
applyMergedBeanDefinitionPostProcessors(mbd, beanType, beanName);
mbd.postProcessed = true;
}
}
// 检测循环依赖，是否需要提早曝光
boolean earlySingletonExposure = (mbd.isSingleton() && this.allowCircularReferences &&
isSingletonCurrentlyInCreation(beanName));
if (earlySingletonExposure) {
if (logger.isDebugEnabled()) {
logger.debug("Eagerly caching bean '" + beanName +
"' to allow for resolving potential circular references");
}
// 避免循环依赖，可以在bean初始化完成前将创建实例的ObjectFactory加入工厂
addSingletonFactory(beanName, new ObjectFactory<Object>() {
@Override
public Object getObject() throws BeansException {
// 对bean再次依赖引用
// AOP也是在这里将advice动态织入bean中，若没有则直接返回bean，不做处理
return getEarlyBeanReference(beanName, mbd, bean);
}
});
}
// Initialize the bean instance.
Object exposedObject = bean;
try {
// 填充bean，注入属性值，如果存在依赖于其他bean的属性，会递归初始化
populateBean(beanName, mbd, instanceWrapper);
if (exposedObject != null) {
// 调用初始化方法
exposedObject = initializeBean(beanName, exposedObject, mbd);
}
}
catch (Throwable ex) {
if (ex instanceof BeanCreationException && beanName.equals(((BeanCreationException) ex).getBeanName())) {
throw (BeanCreationException) ex;
}
else {
throw new BeanCreationException(mbd.getResourceDescription(), beanName, "Initialization of bean failed", ex);
}
}
if (earlySingletonExposure) {
Object earlySingletonReference = getSingleton(beanName, false);
// earlySingletonReference只有在检测到有循环依赖的情况下才会不为空
if (earlySingletonReference != null) {
if (exposedObject == bean) {
exposedObject = earlySingletonReference;
}
else if (!this.allowRawInjectionDespiteWrapping && hasDependentBean(beanName)) {
String[] dependentBeans = getDependentBeans(beanName);
Set<String> actualDependentBeans = new LinkedHashSet<String>(dependentBeans.length);
for (String dependentBean : dependentBeans) {
// 检测依赖
if (!removeSingletonIfCreatedForTypeCheckOnly(dependentBean)) {
actualDependentBeans.add(dependentBean);
}
}
if (!actualDependentBeans.isEmpty()) {
throw new BeanCurrentlyInCreationException(beanName,
"Bean with name '" + beanName + "' has been injected into other beans [" +
StringUtils.collectionToCommaDelimitedString(actualDependentBeans) +
"] in its raw version as part of a circular reference, but has eventually been " +
"wrapped. This means that said other beans do not use the final version of the " +
"bean. This is often the result of over-eager type matching - consider using " +
"'getBeanNamesOfType' with the 'allowEagerInit' flag turned off, for example.");
}
}
}
}
// Register bean as disposable.
try {
// 依据scopse注册bean
registerDisposableBeanIfNecessary(beanName, bean, mbd);
}
catch (BeanDefinitionValidationException ex) {
throw new BeanCreationException(mbd.getResourceDescription(), beanName, "Invalid destruction signature", ex);
}
return exposedObject;
}
上面源码完成的操作可以概括为以下几点：
1. 开始是单例的话要先清除缓存；
2. 实例化bean，将BeanDefinition转换为BeanWrapper；
3. 使用MergedBeanDefinitionPostProcessor，Autowired注解就是通过此方法实现类型的预解析；
4. 解决循环依赖问题；
5. 填充属性，将属性填充到bean实例中；
6. 注册DisposableBean；
7. 创建完成并返回
接下来创建bean实例，看createBeanInstance()方法：
protected BeanWrapper createBeanInstance(String beanName, RootBeanDefinition mbd, Object[] args) {
// 解析class
Class<?> beanClass = resolveBeanClass(mbd, beanName);
if (beanClass != null && !Modifier.isPublic(beanClass.getModifiers()) && !mbd.isNonPublicAccessAllowed()) {
throw new BeanCreationException(mbd.getResourceDescription(), beanName,
"Bean class isn't public, and non-public access not allowed: " + beanClass.getName());
}
// 若工厂方法不为空则使用工厂方法初始化
if (mbd.getFactoryMethodName() != null) {
return instantiateUsingFactoryMethod(beanName, mbd, args);
}
// Shortcut when re-creating the same bean...
boolean resolved = false;
boolean autowireNecessary = false;
if (args == null) {
synchronized (mbd.constructorArgumentLock) {
if (mbd.resolvedConstructorOrFactoryMethod != null) {
resolved = true;
autowireNecessary = mbd.constructorArgumentsResolved;
}
}
}
// 如果已经解析过则使用解析好的构造方法不需要再次锁定
if (resolved) {
if (autowireNecessary) {
// 构造方法自动注入
return autowireConstructor(beanName, mbd, null, null);
}
else {
// 使用默认构造方法
return instantiateBean(beanName, mbd);
}
}
// 根据参数解析构造方法
Constructor<?>[] ctors = determineConstructorsFromBeanPostProcessors(beanClass, beanName);
if (ctors != null ||
mbd.getResolvedAutowireMode() == RootBeanDefinition.AUTOWIRE_CONSTRUCTOR ||
mbd.hasConstructorArgumentValues() || !ObjectUtils.isEmpty(args)) {
return autowireConstructor(beanName, mbd, ctors, args);
}
// No special handling: simply use no-arg constructor.
return instantiateBean(beanName, mbd);
}
可以看出如果在RootBeanDefinition中存在factoryMethodName属性，或者说配置文件中配置了factory-method，那么Spring会尝试使用instantiateUsingFactoryMethod(beanName, mbd, args)方法根据RootBeanDefinition中的配置生成bean实例。
再解析构造方法并进行实例化，Spring会根据参数及类型判断使用哪个构造方法再进行实例化。判断调用哪个构造方法的过程会采用缓存机制，如果已经解析过则不需要重复解析而是从RootBeanDefinition中的属性resolvedConstructorOrFactoryMethod缓存的值去取，不然则需要再次解析。
创建bean后接下来就进行属性注入，属性注入的操作在populateBean()方法中，跟进源码：
protected void populateBean(String beanName, RootBeanDefinition mbd, BeanWrapper bw) {
PropertyValues pvs = mbd.getPropertyValues();
if (bw == null) {
if (!pvs.isEmpty()) {
throw new BeanCreationException(
mbd.getResourceDescription(), beanName, "Cannot apply property values to null instance");
}
else {
// Skip property population phase for null instance.
return;
}
}
// Give any InstantiationAwareBeanPostProcessors the opportunity to modify the
// state of the bean before properties are set. This can be used, for example,
// to support styles of field injection.
boolean continueWithPropertyPopulation = true;
if (!mbd.isSynthetic() && hasInstantiationAwareBeanPostProcessors()) {
for (BeanPostProcessor bp : getBeanPostProcessors()) {
if (bp instanceof InstantiationAwareBeanPostProcessor) {
InstantiationAwareBeanPostProcessor ibp = (InstantiationAwareBeanPostProcessor) bp;
if (!ibp.postProcessAfterInstantiation(bw.getWrappedInstance(), beanName)) {
continueWithPropertyPopulation = false;
break;
}
}
}
}
if (!continueWithPropertyPopulation) {
return;
}
if (mbd.getResolvedAutowireMode() == RootBeanDefinition.AUTOWIRE_BY_NAME ||
mbd.getResolvedAutowireMode() == RootBeanDefinition.AUTOWIRE_BY_TYPE) {
MutablePropertyValues newPvs = new MutablePropertyValues(pvs);
// Add property values based on autowire by name if applicable.
if (mbd.getResolvedAutowireMode() == RootBeanDefinition.AUTOWIRE_BY_NAME) {
autowireByName(beanName, mbd, bw, newPvs);
}
// Add property values based on autowire by type if applicable.
if (mbd.getResolvedAutowireMode() == RootBeanDefinition.AUTOWIRE_BY_TYPE) {
autowireByType(beanName, mbd, bw, newPvs);
}
pvs = newPvs;
}
boolean hasInstAwareBpps = hasInstantiationAwareBeanPostProcessors();
boolean needsDepCheck = (mbd.getDependencyCheck() != RootBeanDefinition.DEPENDENCY_CHECK_NONE);
if (hasInstAwareBpps || needsDepCheck) {
PropertyDescriptor[] filteredPds = filterPropertyDescriptorsForDependencyCheck(bw, mbd.allowCaching);
if (hasInstAwareBpps) {
for (BeanPostProcessor bp : getBeanPostProcessors()) {
if (bp instanceof InstantiationAwareBeanPostProcessor) {
InstantiationAwareBeanPostProcessor ibp = (InstantiationAwareBeanPostProcessor) bp;
pvs = ibp.postProcessPropertyValues(pvs, filteredPds, bw.getWrappedInstance(), beanName);
if (pvs == null) {
return;
}
}
}
}
if (needsDepCheck) {
checkDependencies(beanName, mbd, filteredPds, pvs);
}
}
applyPropertyValues(beanName, mbd, bw, pvs);
}
在populateBean方法的中的主要处理流程：
1. InstantiationAwareBeanPostProcessor处理器的postProcessAfterInstantiation方法控制程序是否继续填充属性；
2. 根据注入类型提取依赖的bean，并存入PropertyValues中；
3. 应用InstantiationAwareBeanPostProcessor处理器的postProcessPropertyValues方法对属性在填充前再次处理，主要还是验证属性；
4. 将所有PropertyValues中的属性填充到BeanWrapper中。
最后初始化bean
学过Spring的都知道bean配置时有一个init-method属性，这个属性的作用是在bean实例化前调用init-method指定的方法进行需要的实例化操作，现在就进入这个方法了；Spring中程序已经执行过bean的实例化，并且进行了属性的填充，而就在这时将会调用用户设定的初始化方法。
protected Object initializeBean(final String beanName, final Object bean, RootBeanDefinition mbd) {
if (System.getSecurityManager() != null) {
AccessController.doPrivileged(new PrivilegedAction<Object>() {
@Override
public Object run() {
invokeAwareMethods(beanName, bean);
return null;
}
}, getAccessControlContext());
}
else {
// 特殊bean处理
invokeAwareMethods(beanName, bean);
}
Object wrappedBean = bean;
if (mbd == null || !mbd.isSynthetic()) {
wrappedBean = applyBeanPostProcessorsBeforeInitialization(wrappedBean, beanName);
}
try {
invokeInitMethods(beanName, wrappedBean, mbd);
}
catch (Throwable ex) {
throw new BeanCreationException(
(mbd != null ? mbd.getResourceDescription() : null),
beanName, "Invocation of init method failed", ex);
}
if (mbd == null || !mbd.isSynthetic()) {
wrappedBean = applyBeanPostProcessorsAfterInitialization(wrappedBean, beanName);
}
return wrappedBean;
}
最后加载完Bean并执行完初始化操作后，一个bean的加载基本就结束了。
最新文章
- CSS 3学习——animation动画
- js如何求一组数中的极值
- C#单例模式详解
- web初学之MVC
- myeclipse2014集成SVN
- How to find configuration file MySQL uses?
- extjs中rowEditing动态编辑
- 我自己的style
- struts1面试题
- enumerateObjectsUsingBlock、enumerateObjectsWithOptions、enumerateObjectsAtIndexes、makeObjectsPerfor使用
- webpack学习笔记（二）-- 初学者常见问题及解决方法
- Python快速入门（1）
- Scrum冲刺阶段7
- 为什么可逆矩阵又叫“非奇异矩阵(non-singular matrix)”?
- HBase 笔记2
- day29 __eq__ 比较
- Hadoop基础-HDFS的API常见操作
- POJ-1143(状态压缩)
- PAT甲题题解-1077. Kuchiguse (20)-找相同后缀
- FTP服务器的配置与实现