[svc][op]LVS+keepalived

lvs是一种负载均衡技术.注意区分负载均衡和高可用的区别.

keepalive是lvs的管理工具

ipvsadm也是lvs的管理工具

keepalive借助ipvsadm管理lvs.所以通常说lvs+keepalive

lvs支持多种负载方式.

理论及配置说明:

http://www.cnblogs.com/edisonchou/p/4281978.html

lvs:DR模式wrr负载:

拓扑

　　　　KA1 LAMP-1

pc------|

　　　　KA2　 LAMP-2

VIP:192.168.14.100

KA1:192.168.14.134

KA1:192.168.14.135

LAMP-1:192.168.141

LAMP-2:192.168.142

安装软件:

lvs:

yum install ipvsadm -y
rpm -qa ipvsadm

KA:

yum install keepalived -y

lamp:配置

RS绑定VIP：

ip addr add 192.168.14.100/ dev lo label lo:

route add -host 192.168.14.100 dev lo

抑制ARP：

echo "" >/proc/sys/net/ipv4/conf/lo/arp_ignore

echo "" >/proc/sys/net/ipv4/conf/lo/arp_announce

echo "" >/proc/sys/net/ipv4/conf/all/arp_ignore

echo "" >/proc/sys/net/ipv4/conf/all/arp_announce

前期准备:

KA的配置文件:主KA

/etc/keepalived/keepalived.conf

! Configuration File for keepalived

global_defs {

   router_id LVS_19

   vrrp_mcast_group4 224.0.1.18

}

vrrp_instance VI_1 {

    state MASTER

    interface eth0

    virtual_router_id

    priority

    advert_int

    authentication {

        auth_type PASS

        auth_pass

    }

    virtual_ipaddress {

      192.168.14.100/ dev eth0 label eth0:

    }

}

#ipvsadm -A -t 192.168.14.100: -s rr -p

virtual_server 192.168.14.100  {

    delay_loop

    lb_algo wrr

    lb_kind DR

    nat_mask 255.255.255.0

    persistence_timeout

    protocol TCP

#ipvsadm -a -t 192.168.14.100: -r 10.0.1.6: -g

    real_server 192.168.14.141  {

        weight

        TCP_CHECK {

        connect_timeout

        nb_get_retry

        delay_before_retry

        connect_port

        }

    }

    real_server 192.168.14.142  {

        weight

        TCP_CHECK {

        connect_timeout

        nb_get_retry

        delay_before_retry

        connect_port

        }

    }

}

备:KA:

! Configuration File for keepalived

global_defs {

   router_id LVS_19

   vrrp_mcast_group4 224.0.1.18

}

vrrp_instance VI_1 {

    state BACKUP

    interface eth0

    virtual_router_id

    priority

    advert_int

    authentication {

        auth_type PASS

        auth_pass

    }

    virtual_ipaddress {

      192.168.14.100/ dev eth0 label eth0:

    }

}

#ipvsadm -A -t 192.168.14.100: -s rr -p

virtual_server 192.168.14.100  {

    delay_loop

    lb_algo wrr

    lb_kind DR

    nat_mask 255.255.255.0

    persistence_timeout

    protocol TCP

#ipvsadm -a -t 192.168.14.100: -r 10.0.1.6: -g

    real_server 192.168.14.141  {

        weight

        TCP_CHECK {

        connect_timeout

        nb_get_retry

        delay_before_retry

        connect_port

        }

    }

    real_server 192.168.14.142  {

        weight

        TCP_CHECK {

        connect_timeout

        nb_get_retry

        delay_before_retry

        connect_port

        }

    }

}

检查:如果一台down了,另一台通过ifconfig就会出现绑定的VIP了

ip add |egrep  "134|135"

理论笔记:

集群--一组服务器
lvs harproxy nginx,keepalive heartbeat
负载均衡高可用

负载模型:
nginx 7层负载
lvs 4层负载
lvs---nginx---webserver

负载:
1,7*24h服务
2,一台机器扛不住

lvs底层原理底层原理:
ipvs
ipvsadm自带
keepalive

名词介绍:
CIP(Client ip address)
DIP(Director IP address)
VIP(virtual ip address)
RIP(Real Server Ip address)=RS

负载的3种模式:
NAT
DR(direct route)
TUN(ip tunnel)
fullnat

DR
RIP
1,绑定VIP
2,抑制arp回应
主要:
LB通过修改目的mac,因此无法改写端口
2000W pv
请求10000一下都可以用haproxy/nginx

NAT模式:
LB要打开转发:
net.ipv4_forward=1

巴特西

[svc][op]LVS+keepalived

最新文章

热门文章