构建 ARM Linux 4.7.3 嵌入式开发环境 —— BusyBox 构建 RootFS
2024-03-27 05:57:14
上一篇我们已经成功将 ARM Linux 4.7.3 的内核利用 U-BOOT 引导了起来。但是细心的你会发现，引导到后面，系统无法启动，出现内核恐慌 （Kernel Panic）。 原因是找不到文件系统。为了让内核成功启动，我们还需要构建一个根文件系统。为了后期开发的方便，我们采用 NFS 网络文件系统。
利用 BusyBox 构建 mini 根文件系统
- 什么是 BusyBox ？
BusyBox 是一个遵循GPL协议、以自由软件形式发行的应用程序。Busybox在单一的可执行文件中提供了精简的Unix工具集，可运行于多款POSIX环境的操作系统，例如Linux（包括Android、Hurd、FreeBSD等等。 由于BusyBox可执行文件尺寸小、并通常使用 Linux内核，这使得它非常适合使用于嵌入式系统。 此外，由于BusyBox功能强大，因此有些人将 BusyBox 称为“嵌入式Linux的瑞士军刀”。
- 下载最新 BusyBox 源码
$ wget -c http://busybox.net/downloads/busybox-1.25.0.tar.bz2
$ tar xvf busybox-1.25..tar.bz2
$ cd busybox-1.25.
- 配置编译 BusyBox
$ make ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- defconfig
$ make ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- menuconfig
BusyBox Setting >> Build Options 勾选编译成静态文件。
$ make ARCH=arm CROSS_COMPILE=arm-linux-gnueabi-
$ make ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- install
$ cd _install
$ mkdir proc sys dev etc etc/init.d
$ touch etc/init.d/rcS
$ cat << EOF > etc/init.d/rcS
#!bin/sh mount -t proc none /proc
mount -t sysfs none /sys
/sbin/mdev -s EOF $ chmod +x etc/init.d/rcS
$ sudo mkdir /rootfs
$ sudo pax -r -w -p e . /rootfs
$ sudo chmod /rootfs -R
$ sudo chown -R nobody:nobody /rootfs
到这里，根文件系统的内容已经准备好了，接下来配置 NFS 。
NFS 服务配置
$ sudo apt install nfs-kernel-server
$ sudo touch /etc/exports
$ sudo cat << EOF > /etc/exports
/rootfs *(rw,sync,no_root_squash,no_subtree_check)
EOF $ sudo service start nfs-kernel-server.service
OK, 到这里 NFS 服务配置完毕。
最后的准备
- 确保 Kernel 配置了 NFS 支持模块。
File systems --->
[*] Network File Systems --->
<*> NFS client support
<*> NFS client support for NFS version 3
[*] NFS client support for the NFSv3 ACL protocol extension
[*] Root file system on NFS
- 修改 U-BOOT 传递给内核的引导参数
想要开机就生效，请参看本系列文章（一）,在编译 U-BOOT 时配置。
setenv bootargs 'root=/dev/nfs rw nfsroot=192.168.0.3:/rootfs init=/linuxrc console=ttyAMA0 ip=192.168.0.5'
启动系统
$ sudo qemu-system-arm -M vexpress-a9 -m 128M -nographic -net nic -net tap,ifname=tap0 -kernel u-boot
U-Boot 2016.07 (Sep 16 2016 - 11:18:06 +0800)
DRAM: 128 MiB
WARNING: Caches not enabled
Flash: 128 MiB
MMC: MMC: 0
*** Warning - bad CRC, using default environment
In: serial
Out: serial
Err: serial
Net: smc911x-0
Hit any key to stop autoboot: 0
=> setenv bootargs 'root=/dev/nfs rw nfsroot=192.168.0.3:/home/rain/rootfs init=/linuxrc console=ttyAMA0 ip=192.168.0.5'
=> tftp 0x62000000 kernel
smc911x: MAC 52:54:00:12:34:56
smc911x: detected LAN9118 controller
smc911x: phy initialized
smc911x: MAC 52:54:00:12:34:56
Using smc911x-0 device
TFTP from server 192.168.0.3; our IP address is 192.168.0.5
Filename 'kernel'.
Load address: 0x62000000
Loading: #################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
################################################
1.6 MiB/s
done
Bytes transferred = 3571036 (367d5c hex)
smc911x: MAC 52:54:00:12:34:56
=> bootz 0x62000000
Kernel image @ 0x62000000 [ 0x000000 - 0x3643e8 ]
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
Booting Linux on physical CPU 0x0
Linux version 4.7.3 (rain@rain-pc) (gcc version 5.4.0 20160609 (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.1) ) #7 SMP Fri Sep 16 11:11:23 CST 2016
CPU: ARMv7 Processor [410fc090] revision 0 (ARMv7), cr=10c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
Machine model: V2P-CA9
Memory policy: Data cache writeback
CPU: All CPU(s) started in SVC mode.
percpu: Embedded 13 pages/cpu @87eb8000 s23116 r8192 d21940 u53248
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
Kernel command line: root=/dev/nfs rw nfsroot=192.168.0.3:/home/rain/rootfs init=/linuxrc console=ttyAMA0 ip=192.168.0.5
log_buf_len individual max cpu contribution: 4096 bytes
log_buf_len total cpu_extra contributions: 12288 bytes
log_buf_len min size: 16384 bytes
log_buf_len: 32768 bytes
early log buf free: 14944(91%)
PID hash table entries: 512 (order: -1, 2048 bytes)
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 121092K/131072K available (5261K kernel code, 161K rwdata, 1424K rodata, 1024K init, 155K bss, 9980K reserved, 0K cma-reserved)
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0x88800000 - 0xff800000 (1904 MB)
lowmem : 0x80000000 - 0x88000000 ( 128 MB)
modules : 0x7f000000 - 0x80000000 ( 16 MB)
.text : 0x80008000 - 0x807875c0 (7678 kB)
.init : 0x80800000 - 0x80900000 (1024 kB)
.data : 0x80900000 - 0x809284a0 ( 162 kB)
.bss : 0x8092a000 - 0x80950cc4 ( 156 kB)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 32.
RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=4
NR_IRQS:16 nr_irqs:16 16
GIC CPU mask not found - kernel will fail to boot.
GIC CPU mask not found - kernel will fail to boot.
L2C: platform modifies aux control register: 0x02020000 -> 0x02420000
L2C: DT/platform modifies aux control register: 0x02020000 -> 0x02420000
L2C-310 enabling early BRESP for Cortex-A9
L2C-310 full line of zeros enabled for Cortex-A9
L2C-310 dynamic clock gating disabled, standby mode disabled
L2C-310 cache controller enabled, 8 ways, 128 kB
L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x46420001
smp_twd: clock not found -2
sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns
clocksource: arm,sp804: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
Console: colour dummy device 80x30
Calibrating local timer... 92.79MHz.
Calibrating delay loop... 516.09 BogoMIPS (lpj=2580480)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x60100000 - 0x60100058
Brought up 1 CPUs
SMP: Total of 1 processors activated (516.09 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 0
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
cpuidle: using governor ladder
of_amba_device_create(): amba_device_add() failed (-19) for /memory-controller@100e0000
of_amba_device_create(): amba_device_add() failed (-19) for /memory-controller@100e1000
of_amba_device_create(): amba_device_add() failed (-19) for /watchdog@100e5000
of_amba_device_create(): amba_device_add() failed (-19) for /smb@04000000/motherboard/iofpga@7,00000000/sysctl@01000
of_amba_device_create(): amba_device_add() failed (-19) for /smb@04000000/motherboard/iofpga@7,00000000/wdt@0f000
hw-breakpoint: debug architecture 0x4 unsupported.
Serial: AMBA PL011 UART driver
10009000.uart: ttyAMA0 at MMIO 0x10009000 (irq = 35, base_baud = 0) is a PL011 rev1
console [ttyAMA0] enabled
1000a000.uart: ttyAMA1 at MMIO 0x1000a000 (irq = 36, base_baud = 0) is a PL011 rev1
1000b000.uart: ttyAMA2 at MMIO 0x1000b000 (irq = 37, base_baud = 0) is a PL011 rev1
1000c000.uart: ttyAMA3 at MMIO 0x1000c000 (irq = 38, base_baud = 0) is a PL011 rev1
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Advanced Linux Sound Architecture Driver Initialized.
clocksource: Switched to clocksource arm,sp804
NET: Registered protocol family 2
TCP established hash table entries: 1024 (order: 0, 4096 bytes)
TCP bind hash table entries: 1024 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 1024 bind 1024)
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
hw perfevents: enabled with armv7_cortex_a9 PMU driver, 1 counters available
futex hash table entries: 1024 (order: 4, 65536 bytes)
workingset: timestamp_bits=29 max_order=15 bucket_order=0
squashfs: version 4.0 (2009/01/31) Phillip Lougher
jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
9p: Installing v9fs 9p2000 file system support
io scheduler noop registered (default)
clcd-pl11x 10020000.clcd: PL111 rev2 at 0x10020000
clcd-pl11x 10020000.clcd: /clcd@10020000 hardware, 1024x768@59 display
Console: switching to colour frame buffer device 128x48
clcd-pl11x 1001f000.clcd: PL111 rev2 at 0x1001f000
clcd-pl11x 1001f000.clcd: /smb@04000000/motherboard/iofpga@7,00000000/clcd@1f000 hardware, 640x480@59 display
40000000.flash: Found 2 x16 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000000 Chip ID 0x000000
Intel/Sharp Extended Query Table at 0x0031
Using buffer write method
40000000.flash: Found 2 x16 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000000 Chip ID 0x000000
Intel/Sharp Extended Query Table at 0x0031
Using buffer write method
Concatenating MTD devices:
(0): "40000000.flash"
(1): "40000000.flash"
into device "40000000.flash"
libphy: smsc911x-mdio: probed
Generic PHY 4e000000.etherne:01: attached PHY driver [Generic PHY] (mii_bus:phy_addr=4e000000.etherne:01, irq=-1)
smsc911x 4e000000.ethernet eth0: MAC Address: 52:54:00:12:34:56
isp1760 4f000000.usb: bus width: 32, oc: digital
isp1760 4f000000.usb: NXP ISP1760 USB Host Controller
isp1760 4f000000.usb: new USB bus registered, assigned bus number 1
isp1760 4f000000.usb: Scratch test failed.
isp1760 4f000000.usb: can't setup: -19
isp1760 4f000000.usb: USB bus 1 deregistered
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
rtc-pl031 10017000.rtc: rtc core: registered pl031 as rtc0
mmci-pl18x 10005000.mmci: Got CD GPIO
mmci-pl18x 10005000.mmci: Got WP GPIO
mmci-pl18x 10005000.mmci: mmc0: PL181 manf 41 rev0 at 0x10005000 irq 31,32 (pio)
ledtrig-cpu: registered to indicate activity on CPUs
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: AT Raw Set 2 keyboard as /devices/platform/smb@04000000/smb@04000000:motherboard/smb@04000000:motherboard:iofpga@7,00000000/10006000.kmi/serio0/input/input0
aaci-pl041 10004000.aaci: ARM AC'97 Interface PL041 rev0 at 0x10004000, irq 30
aaci-pl041 10004000.aaci: FIFO 512 entries
oprofile: using arm/armv7-ca9
NET: Registered protocol family 17
9pnet: Installing 9P2000 support
Registering SWP/SWPB emulation handler
rtc-pl031 10017000.rtc: setting system clock to 2016-09-19 05:56:32 UTC (1474264592)
smsc911x 4e000000.ethernet eth0: SMSC911x/921x identified at 0x892a0000, IRQ: 28
input: ImExPS/2 BYD TouchPad as /devices/platform/smb@04000000/smb@04000000:motherboard/smb@04000000:motherboard:iofpga@7,00000000/10007000.kmi/serio1/input/input2
IP-Config: Guessing netmask 255.255.255.0
IP-Config: Complete:
device=eth0, hwaddr=52:54:00:12:34:56, ipaddr=192.168.0.5, mask=255.255.255.0, gw=255.255.255.255
host=192.168.0.5, domain=, nis-domain=(none)
bootserver=255.255.255.255, rootserver=192.168.0.3, rootpath=
ALSA device list:
#0: ARM AC'97 Interface PL041 rev0 at 0x10004000, irq 30
VFS: Mounted root (nfs filesystem) on device 0:12.
Freeing unused kernel memory: 1024K (80800000 - 80900000)
nfs: server 192.168.0.3 not responding, still trying
nfs: server 192.168.0.3 OK
Please press Enter to activate this console.
/ # ls
bin dev etc linuxrc proc sbin sys usr
/ # ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue qlen 1
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000
link/ether 52:54:00:12:34:56 brd ff:ff:ff:ff:ff:ff
inet 192.168.0.5/24 brd 192.168.0.255 scope global eth0
valid_lft forever preferred_lft forever
/ # uname -a
Linux 192.168.0.5 4.7.3 #7 SMP Fri Sep 16 11:11:23 CST 2016 armv7l GNU/Linux
/ #
参考文章
- Build an embedded Linux distro from scratch
- Network File System (NFS)
- Building a Root File System using BusyBox
- u-boot引导kernel，用nfs挂载根文件系统
原创文章，转载请注明出处！
最新文章
- (转)C# XMPP客户端与openfire通信（Matrix Xmpp 授权破解教程）
- VMware网络设置详解--不错
- 动态创建script在IE中缓存js文件时导致编码不正确bug
- 第二章 jQuery数组和字符串
- 14个HTML5实现的效果合集
- Nginx个人简单理解
- poj3122 pie
- 四大开源协议：BSD、Apache、GPL、LGPL
- (未解决)问题记录ionic android 签名之后安装到手机上点击运行出现闪退，不签名运行正常
- Delphi线程同步（临界区、互斥、信号量，包括详细代码）
- 用lambda表达式声明委托
- launchMode 和 onNewIntent 关系 任务栈知识.
- Quick Cocos2dx controller的初步实现
- 数据库Mysql的安装及操作---数据引擎
- Jfinal-Plugin源码解读
- AppBoxFuture(六): 前端组件化开发
- input file文件上传图片显示web接口
- 利用H5本地存储localStorage、sessionStorage
- 20171126--fragment的小项目
- HashTable浅析